Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #16  
Old 10-08-2006, 09:27 PM
andy andy is offline
VideoKarma Member
 
Join Date: Jul 2002
Posts: 4,004
Quote:
Originally Posted by Adam
The Zenith was sitting outside in a pile of real junker sets, it was covered in this sticky goop, but it cleaned up good. The remote looks like it's from the right year, but it has controls for both a TV and VCR, and no keypad for entering the channel numbers. And the keypad on my other remote works with this TV so I would think that the original remote would have had one. I changed the battery and that remote still doesn't work. I really don't know if it goes with this set because that thrift store throws all the remotes in a bin rather than keeping them with the TVs. This was the only one off a Zenith from around this year in the bin.
That remote was included with at least one Zenith VCR. While it could have been original to the TV, I doubt Zenith would have supplied it with a remote with no direct access. Then again, it didn't make sense to omit the keypad for the VCR either.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:26 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.