![]() |
|
|
|
#1
|
||||
|
||||
|
I think this would need at least one more tube if it has FM - maybe 12AT7 or 6AQ8 - but I can't read the dial well enough to tell. Does it have a band marked "FM" or "UKW"?
If it doesn't have FM, it may be an export model for somewhere other than the US and Europe. It DOES have a power transformer, which is good. (The Metz 205 runs directly off-line without a transfomer - potentially dangerous). The EM34 eye tube is listed at Antique Electronic Supply for $78 each... and they don't have any left! The others aren't hard to find or expensive if needed - and they may all be fine. I wouldn't recommend plugging it in - I don't know where you're located, but it would be good to have a tech look this over first. You might try posting at the forum at antiqueradios.com - |
|
#2
|
|||
|
|||
|
Hi Sandy:
Thanks for your words. This radio has been at home for 50 years and I didn't even notice it, but now I'm hooked. I really feel sad about all those antique radios I remember seeing in my relative's houses, but now they're lost . My Metz looks a lot like those Grundigs I have seen in the web. Bye |
|
#3
|
|||
|
|||
|
Hi Tom:
It doesn't have "FM" nor "UKW". I am attaching a picture of the dial. You are right about the "export model". This one was bought in Perú (220V) by my father a few years before getting married in 1959 and now it "lives" with me in Venezuela (110V). It actually has text written in english and french in the back Everything works fine, but it is good to know the price of the spares, just in case. It is funny that a tube can cost more than the entire radio, but no problem... I am a little afraid of plugging it in here even though the radio was working Ok in Perú (220V). Well, actually almost.... It is fixed in one station due to a broken string inside, but that is a minor problem. I'm going to try to see if the fuse "problem" is a problem or not. Thanks for the advise. Languedoc |
![]() |
| Thread Tools | |
| Display Modes | |
|
|