![]() |
|
|
|
#1
|
||||
|
||||
|
I feel as though its well worth it to preserve the beauty of these sets. If the water damage is not too severe, you may be able to sand away the water stain and simply restain the wood. This would require complete disassembly of the cabinet, but at least you could have the excuse to troubleshot everything while its apart
__________________
Jordan |
|
#2
|
||||
|
||||
|
The top of the cabinet is shot. Major chipping of veneer along the edges, as well as warped and lifting areas. Mere sanding isn't going to replace all the chipped-off missing pieces.
If I had to restore the cabinet -- and I have fixed worse ones -- I would completely remove the top veneer layer and replace it, then refinish the entire cabinet in lacquer. It's not rocket science, and the rest of the cabinet looks like an easy refinish (after you remove the chassis and picture tube and mask off the speaker grille, of course). If you don't want to pay someone to do it, you can send me email via http://antiqueradio.org/contact.htm and I could give you more specific advice on how to do this sort of thing. Regards, Phil Nelson Phil's Old Radios http://antiqueradio.org/index.html |
![]() |
| Thread Tools | |
| Display Modes | |
|
|