RCA Colortrak 2000, No Red

[jpdylon]

I would loosen the clamp closest to the bse of the CRT. if memory serves that assembly is part of the push clamps attached to the crt board. push the clamps together while gently wiggling the board (while lightly pulling back) to free it from the crt. I don't quite remember what the stakes are for. Do you have some pictrures from various angles so I can get a look at the board? Its been awhile since I've torn into one of these. The plastic assembly with the clamps is usually brittle as hell from hears of heat and cold, so don't be too surprised if it breaks. Its no big deal if it does, it was just meant to keep the CRT board from moving around.