Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 08-12-2006, 11:41 PM
JCFitz JCFitz is offline
VideoKarma Member
 
Join Date: Sep 2005
Location: Willards,MD
Posts: 411
I used to fix many a 9-160 module by soldering the crap out of it especially if it's never been rebuilt.Common parts that didn't get much solder and break loose are the diodes in the output circuit,flyback pins,12v startup transformer.filter choke etc.The dual filter can failed a lot.One section of which could cause shutdown.The early ones did have a problem that caused horizontal output transistor failure.They used the same resistor and cap in the emitter circuit as the chromacolor II chassis that failed a lot.All the rebuilt ones are modified with much lower value wirewound resistors and no electrolytic capacitor.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:29 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.