Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 06-13-2006, 09:49 AM
pallophotophone pallophotophone is offline
VideoKarma Member
 
Join Date: Sep 2005
Posts: 102
The switch and or it's shaft have lubricants which have gummed up over the years causing the actual switch to operate slowly.

If you'll flush out the old lubricants with contact cleaner ( not the foam type ) while manipulating the switch, and with ac disconnected , it willl free up and operate normally.
If the solvent is flammible , let it evaporate a day or two before applying Ac again.

The loss of the lubricant will not cause the switch to wear out with the occational use most vintage sets receive.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:34 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.