Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 05-27-2006, 01:00 PM
Nugrl
Guest
 
Posts: n/a
It says on the remote that came with the tv that it takes Type (J) 6V not sure if I have ever seen a battery like that??? just thought they all took either AA or AAA
Reply With Quote
  #2  
Old 05-27-2006, 01:19 PM
kx250rider's Avatar
kx250rider kx250rider is offline
REAL TVs have TUBES!
 
Join Date: Oct 2005
Location: Los Angeles & Dallas
Posts: 3,239
Quote:
Originally Posted by Nugrl
It says on the remote that came with the tv that it takes Type (J) 6V not sure if I have ever seen a battery like that??? just thought they all took either AA or AAA
The J battery is a weird one, and was only used in those early 80s Zeniths. You can still get them at Radio Shack, and in the photo & electronics section of WalMart or Target, etc. But the battery was about $9 last time I checked, so you might be better off just using the universal. And unless you have a SpacePhone in your set (and want to use the SpacePhone), all functions of the TV will work fine with the universal.

On the TV keyboard, you can put channels in memory by keying the channel and pressing ENTER on the TV keyboard. Note that they will not stay in "favorite channel" memory if you key them in by the remote. And to get rid of ones you don't want, go to that channel and push SKIP. Most Cable TV signals around here are "STD" setting, but you can play with that switch and see which position gets the most channels for you. The AFC is also an experiment. First set it as FIXED, and see if some channels have no color or no sound, or are out of tune. If so, go to SEARCH AFT and see if that's better. The FIXED position makes the channels change much quicker though, if it works in your neighborhood.

Charles

Last edited by Kaye-Halbert TV; 05-27-2006 at 01:25 PM.
Reply With Quote
  #3  
Old 05-27-2006, 02:12 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
AFC fixed/search option

"AFC fixed/search" in Zenith TVs of 1980s-'90s vintage has to do with the tuner AFC system, not the channel scan, IIRC. The search option is used if you have a video game or some other external device which does not work or works poorly with the option set to fixed. The search feature causes the tuner to search for an external unit's true output frequency, which is very often different from a broadcast or cable signal. For use with regular broadcast TV or cable, I'd leave the fixed/search option set to "fixed" and forget about it. Zenith used this option on many of its cable-ready sets of this vintage (it is on an OSD submenu on some sets, like the Sentry 2 series). The channel search is done by locating AUTO CH. SEARCH on the OSD setup menu and pressing either ADJUST key to start. The tuner will then search for and store in memory all active channels in your area or on your cable system.

Hope this helps.

Kind regards,
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:13 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.