Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 04-28-2006, 12:49 PM
andy andy is offline
VideoKarma Member
 
Join Date: Jul 2002
Posts: 4,004
If you're on cable, some channels might have slightly over-modulated video. That's not a problem for a modern set, but an old IF circuit that's not perfectly aligned will cause some leakage into the sound.

As for your set eating modules, bad soldering is the most common problem with those. Zenith never really got the hang of circuit board soldering, even by the late 80's they were still having trouble. It's also not unusual to see old TVs with numerous intermittent problems that the original owner put up with. Once you fix the main problem with the set, those other problems gradually become apparent.

Last edited by andy; 04-28-2006 at 12:52 PM.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:48 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.