|
|
|
#3
07-23-2003, 04:33 AM
|
||||
|
||||
|
Thanks for the info andy. I will get beneath the chassis later today and check/replace those components. Ive got a zenith service manaul w/ schematics, but they dont have a simple troubleshooting guide. I did check the cathode current and its fine @ 200ma. It is to be anywhere from 180-220ma. Guess this was considered a typical problem if it was listed as a trouble for the chassis. Will let you know what happens.
Thanks!-Doug Last edited by drh4683; 07-23-2003 at 04:36 AM. 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode