Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #16  
Old 02-24-2006, 02:45 AM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
I have a Zenith C-845 AM/FM radio, 1960 vintage. It has a very nice oak finish cabinet, but the front panel is plastic. The Z crest in the center of the cabinet, as well as the ring around the speaker opening, however, appear to be metal. This seems to me to be an interesting combination of wood, plastic and metal used in a radio which was one of Zenith's best table models of the 1960s. It was only a matter of time, I guess, before the company's TVs went the same route. Zenith color console TVs of 1970s vintage had real wood cabinets, all right, but the accent pieces over the speaker grilles, etc. were brown plastic. It was only a short step from there to all-plastic cabinets, or cabinets made of such thin metal it isn't funny. I don't much care for wood-grain metal cabinets, either. If I'm going to get a TV in a wood cabinet, I want it to be all wood, not this fake stuff. I have my video entertainment center (TV, VCR, DVD, cable box) installed in a genuine solid oak utility cart made by Sauder; I would not trade it for any of this plastic stuff coming off the lines these days.

Zenith and other manufacturers' console black-and-white TVs of the '50s until at least the early '60s also had genuine solid wood cabinets; in the late '60s until 1972 I had a 23" Zenith b&w console, 1963 vintage, which was in a beautiful dark wood cabinet (not sure if it was walnut, mahogany, or...?). My folks' first TV was a 1954 RCA Victor 21" b&w console in a dark wood cabinet as well; again, I'm not sure what type of wood it was, but, like my Zenith (which met its demise when I moved in 1972--boy, I hated to part with it and wish I could have kept that nice cabinet), it was real solid wood, none of this particle-board stuff we see today. I think TV manufacturers were starting to cut corners by the mid-'60s, however, as my folks' second TV, a Crosley Super V 21" b&w console, was in a blond wood cabinet; I swear, the wood in it wasn't nearly as solid as the RCA or my Zenith. When my mother wanted a new TV in 1965, my dad bought a Sears Silvertone 17" b&w all channel portable in, yup, you guessed it, an all-plastic cabinet. Every TV I ever owned, except a 1964-vintage Silvertone color set in a metal cabinet (and a later-vintage Sears Silvertone with a smaller CRT, also in a metal cabinet) that weighed the proverbial ton (blame it on that 21" round CRT), was in a plastic cabinet, including the two color sets I have today, my RCA CTC185 and Zenith Sentry 2. The new plasma/LCD sets are worse. The "cabinets" of these TVs are so fragile that one hard bump will crack the plastic, it is far too easy to knock the set off a table (some recent Philips-"Magnavox" CRT televisions are like that as well--just the act of pressing a button on the front panel will push the set off its stand; best to operate these sets with the remote, IMHO), and of course the plasma or LCD panels are fragile as all get out as well. I see plasma/LCD TVs on ebay every now and again with broken screens and other broken parts rendering them unusable; the sad part is the sets are only, in many cases, only a year or two old.

I know we're living in a throwaway age, but this, IMHO, is too much. What's worse is the way most plasma/LCD TVs are made, with the video driver chips for the panel molded right into the ribbon cable between the TV chassis and the display. I read in one of these forums here at AK where if one of those driver ICs goes bad, the entire panel must be replaced, as the cable is hard-wired to the panel at one end and to the chassis at the other. Whatever happened to the days when TV sets were built to last? These days, even LCD or plasma sets will wind up in the trash after a few years. I have a friend whose parents had a 25" Zenith System III color console; it lasted them 15 years. When that set finally bit the dust in the early '90s, they bought a 25" RCA (Thomson) set with Guide Plus, stereo sound, remote....the whole nine yards. Two years later the CRT burned out. They pitched that set and bought yet another RCA/Thomson 25-incher. That did it. That set still works to this day, about five years later, more or less. It's in a plastic cabinet, of course, as was their first RCA/Thomson set. My own 19" RCA/Thomson CTC185 is in a plastic cabinet as well, and still works like a charm six years after I purchased it, with only two minor repairs.

Zenith (the last vestiges of the company before LG took over and wrecked their fine 82-year reputation for quality, for good) had two color consoles in the '90s in wood cabinets, although I suspect these so-called "wood" cabinets were actually particle board with wood grain pasted over it. Zenith also used this dodge in the 1930s to make "wood-grain" cabinets for its table radios of the period, including the famous "Walton" model; the technique was known as photo-finish, in which walnut or some other fine grade of wood was photographed and printed on heavy paper which was then glued over the particle board. However, in those days they had an excuse for cutting corners: the country was in the middle of the Depression in the '30s. American TV manufacturers' excuse today for using more and more plastic, rather than wood, in radio and TV cabinets, among other things, is that most everything is made offshore these days, as cheaply as possible. You cannot hope to sell a TV set, for example, for the prices a lot of the offshore makes are selling for these days unless the set is made using every cost- and corner-cutting technique known to man, including putting the thing in a plastic cabinet that cracks if you put the least bit of pressure on it, not to mention circuitry that goes West in a very short time. No wonder we are already seeing RCA/Thomson Guide-Plus (not to mention Philips, et al.) TVs, some not more than a couple years old, on treelawns and curbs these days. Before long we'll probably be seeing plasmas or LCDs being pitched because of broken screens, bad driver chips, or even broken control-panel buttons; I've seen perfectly good sets in the trash simply because the cord was frayed or the remote quit. I once rescued a 1969 Zenith SC300 19" portable that had been thrown out simply because the remote hand unit got lost; the TV itself worked perfectly after I got it home. There is also the case where people throw out perfectly good TVs, radios, stereos and other furniture and buy new, cheap plastic stuff simply because the styling of the old things is out of date, but that's material for another thread.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:50 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.