Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #15  
Old 01-28-2006, 11:12 PM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,815
In sets that show the dot or line at shut down, it's OK, or the manufacturer would have had to do something to prevent eating a lot of burned picture tubes. I saw this happen at Motorola on one early model of ttansistor B&W chassis. I can't remember the exact cause, but if you turned it off with the on-off switch, the tube was discharged enough before the raster shrank.. HOWEVER, the first factory run had the last person on the line pulling the line cord, and the video drive would go to cutoff immediately, with a spot appearing and burning the tube a long time after. Well, they were pulling the plug, putting the set in the box, and the burn would happen when the set was out of sight. When the box was opened, there was a burned tube! They had to put in a zener that pulled down the video drive as soon as the B+ died, causing a bright flash as the raster was collapsing but not yet down to a dot.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:30 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.