Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 12-16-2005, 06:05 PM
drh4683's Avatar
drh4683 drh4683 is offline
VideoKarma Member
 
Join Date: Jan 2003
Location: Chicago, IL
Posts: 2,094
remote UHF tuning was available on zenith and magnavox sets in the 60's. In 1969 zenith introduced the "ultra-matic tuner" It was offered with sets having space command or power tuning. The ultramatic had 6 presets for UHF channels A-F. It was entirely mechanical. You would open the door on the set and dial in the channel desired for channels A-F. Each channel had a worm gear that moved a pin up or down. The shafts were arrayed around a cast aluminum drum that would rotate via drive motor. As the drum rotated to the next UHF preset, one of the pins would make contact and move a cam on the UHF tuner. The UHF tuner was just a typical continuous tuner but it had a spring loaded return. This is how the channels could switch just by moving the preset pins up or down.
This was a very noisy system! With all the mechanical components moving produced a very loud "clunk clunk". It was much quiter operation once you got to the VHF channels. The tuner mechanisem was continuous, from channels 2-13, then the UHF tuner would active then you would go from channels A-F untill you got back to channel 2 when the VHF tuner would reactivate.
Its zeniths most intricate tuning system. For that fact, its my favorite tuner out there and works very well.

Magnavox used a motorized continuous UHF tuner. The motor would stop when the signal strength peaked, it would stop. There is a coil that fits over the 2nd IF and decected signal strength. Once the signal was strong enough, the voltage produced would click the motor relay off to stop. I had a '67 model magnavox TV with this set up and worked excellent. oldtvman has it now.
The nice feature on this set, is that the remote control actually had UHF tuning buttons so you would not need to cycle through all the channels before you get back to UHF like the zenith did.

Here is a picture of the ultramatic tuner in my '69 zenith space command 600. I got this TV about 2 years ago already. At that time, The UHF tuner needed work so it got pulled and took pictures then.
Attached Images
File Type: jpg 69zenithE1.JPG (68.7 KB, 45 views)
File Type: jpg 69zenithD1.JPG (57.6 KB, 49 views)
__________________
I tolerate the present by living in the past...
To see drh4683's photo page, click here
To see drh4683's youtube page, click here

Last edited by drh4683; 12-16-2005 at 06:09 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:02 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.