Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 12-08-2005, 07:14 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
Quote:
Originally Posted by RetroHacker
Hmm, it's weird - it seems every color set I find has some HV problem, where all my previous sets were black and white sets with low voltage problems, or just bad caps in vertical circuits and stuff. With the old B&W sets I normally didn't have to deal with the HV - I was replacing electrolytics and coupling caps and rebuilding vertical circuits, HV just always worked. Here with the color sets, the HV sections seem to be the weak point
-Ian
Remember that the HV section in a color set has to work much harder than that in a B&W set. With the shadow mask, about 1/4 of the electrons from each gun actually hits phosper, the rest hit the mask and are wasted. To a first order approximation, the HV consumes 4 times as much power. And if the red, green and blue phospers are not as efficient as phospers in a B&W tube, it gets worse.

That coupled with manufacturers cutting cost to the bone would do it.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:07 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.