|
|
|
#2
10-02-2005, 05:41 PM
|
||||
|
||||
|
What we have done sometimes where absolutely original appearance is not needed above the chassis is to mount a small Radio Shack project box in the space occupied by the old caps, and then mount terminal strips in there and mount the new caps, and run the leads through grommets to the chassis through the old cap holes. We have done this on electronic organs where there was not enough room to mount new caps underneath. The new caps are safely enclosed when the cover is put on.
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode