Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 09-07-2005, 08:46 PM
Chad Hauris's Avatar
Chad Hauris Chad Hauris is offline
VideoKarma Member
 
Join Date: May 2003
Location: West Texas
Posts: 2,085
I worked on one of these last year. There will be a lot of bad wiring in there. I disassembeled the IF cans and connected new wires. There are some shielded cables made up of rubber covered wire that disintegrates in a spring wire braid...I replaced these with coax cable like RG-59 and it worked great after re-aligning. We also made new knobs for it out of wood in our shop.

You can stick a PM speaker in there...just replace the field winding with a filter choke or the highest resistance winding of an old power or output transformer. You will probably need an output transformer too as it is on the speaker if I recall right.
__________________
Chad Hauris
http://www.youtube.com/user/retrochad
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:20 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.