Found a CTC-27

[devoid]

How do you get away with all that at work?

[wa2ise]

If you still have the broken off piece of yoke ferrite, just use some epoxy or superglue to reattach it. And if it's clear epoxy you might be able to fill in the chips on the CRT face. Or use the stuff meant for car windshield chip repair.

[Eric H]

Originally Posted by wa2ise

If you still have the broken off piece of yoke ferrite, just use some epoxy or superglue to reattach it.

That's basically what I did, i globbed some low acid Silicone on the inside of the broken pieces and stuck them to the windings, then I wrapped electrical tape around it to hold it in place.

The picture is shifted to one side a little but I don't know if this has anything to do with the yoke or if it's just out of adjustment somewhere.

I put the thing back together today and was actually able to tune a weak picture using a coat hanger for an antenna, the color works too!

[Eric H]

Originally Posted by devoid

How do you get away with all that at work?

By working on it during lunch and break mostly.
My bosses are actually pretty cool, they really don't care as long as i get my work done and don't spend too much time on it.