Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #7  
Old 05-18-2005, 06:14 AM
Chad Hauris's Avatar
Chad Hauris Chad Hauris is offline
VideoKarma Member
 
Join Date: May 2003
Location: West Texas
Posts: 2,085
You can use the neon lamp taped to a non-conductive stick to check out the different parts of the HV system...first hold near insulation of Horizontal output tube plate lead to see if there is HV AC there...then you can move it to the plate of the rectifier. I don't know if it can detect the DC from the output of the rectifier but I know it can pick up the AC at the horizontal output plate, the yoke leads, and the HV rectifier plate lead.

This is for a traditional magnetic deflection set...if it is electrostatic it will use something like a 12AU7 for the horizontal output tube and use a seperate tube as an oscillator for HV.

The lamp may be a cathode fuse on the horizontal output tube...I have installed lamps like this in color sets. In sets having a horizontal efficiency coil you can adjust it for minimum current by adjusting for minimum lamp brightness.
__________________
Chad Hauris
http://www.youtube.com/user/retrochad

Last edited by Chad Hauris; 05-18-2005 at 09:41 AM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:04 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.