Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 05-18-2005, 12:40 AM
Jonathan Jonathan is offline
AK Member
 
Join Date: May 2005
Location: Pennsylvania
Posts: 326
Ok, well, I got the set together, powered it up and I get no raster. All tubes light up except the high voltage rectifier that is plugged into the socket that stands off from the chassis. I attempted to discharge the CRT by connecting a wire to the chassis and to a screwdriver, and touched the anode, but I never got any spark at all. Does the HV rectifier tube have a filament that is easy to see glowing?

Also, what is the Lamp in the HV section for? It it used as a fuse? A #47 type lamp was in there, but I replaced it with a #44 lamp. Both don't light up, and the #47 lamp I took out has a good filament. Is it suppose to light?

I have a good flyback for this set, but just wanted to know what to do before I put it in.

Thanks.

Jonathan
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:43 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.