Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #21  
Old 05-05-2005, 05:22 PM
Chad Hauris's Avatar
Chad Hauris Chad Hauris is offline
VideoKarma Member
 
Join Date: May 2003
Location: West Texas
Posts: 2,085
Another trick is to inject 60 hz ac from the filament supply through a .047 or so cap into the vertical amp/oscillator on tube sets to check out a "no vertical" condition...the speaker trick sounds interesting. You maybe could use it on tube sets as the vert output transformer is like an audio output trans. but sometimes it's an auto transformer and there is high DC voltage at the yoke leads.

That's great that you got those magnets remagnatized Andy...you maybe could also use something like an auto headlamp or 2 or something like that that draws a lot of current in series with the coils to limit the current but still allow a high amount to flow.

Thank goodness for the world wide web, I have learned so many valuable troubleshooting tips from it.
__________________
Chad Hauris
http://www.youtube.com/user/retrochad
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:47 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.