Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 11-04-2026, 12:18 AM
Deathspiral Deathspiral is offline
VideoKarma Member
 
Join Date: Jun 2026
Posts: 2
I know this is an old thread but i had the exact same issue when i pressed the factory reset command on the remote in the service menu. I was going to ask you if you figured out the problem because im worried that my EEPROM got corrupted.

HV come on; then shuts off immediately with a 1 blink error code pointing to B+ on the deflection board, AC is coming into the D board, getting about 118v before it hits the bridge rectifier. HOT isn't reading shorted solder has been reflowed on the stress points.

Last edited by Deathspiral; 11-04-2026 at 12:24 AM.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:32 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.