Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 09-30-2026, 07:02 PM
liammc00's Avatar
liammc00 liammc00 is offline
real TVs have a CRT
 
Join Date: Jun 2018
Location: Belpre, Ohio
Posts: 270
Well things keep going badly with this set. I went to turn the set on today but the only thing that happened was the power relay clicked but no HV. the cause was bad solder joints i think as yesterday it worked fine but after i turned the set off i messed with the thermistor and apparently i bumped the power resistor right next to it. i took the chassis out and found and fixed the solder joints and found that a lot of big value capacitors had failed like 1000uf 35V tested at 299uf but had 0.00 ESR that was true for most of big caps on the main board. After that checked my work and then i put the chassis back into the set. than i spent a very long time getting everything plugged back in making sure they went where they supposed. I went to test the set and now its completely dead. No fuses are blown and I'm getting power from stand by supply which matches what the schmatics says.

Last edited by liammc00; 10-01-2026 at 09:37 AM.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:09 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.