I'll be using some CE Manufacturing twist-loc caps for the three man power supply electrolytics.
Curiously the first cap only has two symbols and values listed on the can even though it is clearly a four section cap?
It is C105 in this diagram. The other two section are used as cathode bypass caps in the sweep circuit.
Also, note C102 is in parallel with C103 in some models. I thought it was an old repair but no, it is factory.
Many, many caps to replace, but at least it is easy to unwrap the leads from the terminal strips.
06-30-2026, 11:13 AM
Hybrid Mode
