Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 05-22-2026, 11:16 AM
SteveMartin SteveMartin is offline
VideoKarma Member
 
Join Date: May 2026
Posts: 7
Update

Thanks very much for the feedback. Since my first post, I did find the damper resistor (R113) was open. I thought for sure it was the smoking gun but replacing it with a new 6 Kohm wire wound resistor only improved the linearity slightly. I’ve replaced and double checked the .035 uF & .05 uF caps. What I did find that helped significantly is adding a 250 ohm resistor across the linearity control coil. I tried different values but 250 seemed to work the best. The two attached pics show the difference. Without the resistor, center is compressed. With the resistor, right side is compressed. I also swapped the damper tube with a solid state replacement but that provided no change. Adjusting L28 or L29 has no visual effect. At this point, I’m going to go through all the waveforms again and compare with the RCA630TS service manual. I’ll also re-check the tube voltages. If I still don’t find anything I’m thinking of buttoning it up and calling it “good enough”. If anyone has any other ideas, I’m all ears. Thanks again.
Attached Images
File Type: jpg Resistor.jpg (82.5 KB, 10 views)
File Type: jpg NoResistor.jpg (73.0 KB, 9 views)
Reply With Quote
  #2  
Old 05-22-2026, 02:11 PM
Penthode's Avatar
Penthode Penthode is offline
VideoKarma Member
 
Join Date: Jun 2009
Location: Kitchener/Waterloo Ontario Canada
Posts: 1,463
One thing you did not mention is the horizontal drive. The stretch to the left of the image suggests the drive to the horizontal output may be high.

I would confirn the drive pot and the 680pf cap is good. Perhaps reducing the series resistance in half by bridging the 10k resistor with another 10k?
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:40 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.