Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #18  
Old 04-29-2026, 05:04 PM
bigboss80's Avatar
bigboss80 bigboss80 is offline
VideoKarma Member
 
Join Date: Feb 2022
Location: Italia/ Sardegna
Posts: 34
I ran some tests on TDA3508 , first I measured the voltage on pin 19 soldered to the circuit and got 1.74 V with both maximum and minimum contrast; then I isolated pin 19 and measured only the voltage on the pad, getting 1.46 V. in the diagram it says that it should be 3.7 volts on pin 19 ,with the pin disconnected from the circuit, the image became completely devoid of contrast.
https://drive.google.com/file/d/170q...w?usp=drivesdk

Last edited by bigboss80; 04-29-2026 at 05:09 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:56 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.