Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 04-29-2026, 02:27 PM
ARC Tech-109 ARC Tech-109 is offline
Retired Batwings Tech
 
Join Date: Jun 2020
Location: Planet Earth
Posts: 612
Jailbars? Are you dealing with poor quality RF modulators or front end overload as I am? My reason for the composite input on my Magnavox was due to the IF board getting damaged while I was trying to deal with some similar issues caused by the poor quality signals coming from cheap RF modulators but the composite input introduced a number of new issues related to impedance matching and the raw input levels needed to get thru the video amps, I've since gone back to RF modulation which has brought me back to square-one and I believe the solution may be the use of CATV head end RF modulators that use SAW filters. As I understand they're far more robust and have a much cleaner output signal than the cheap-o's used in home equipment, I do have experience with these as our local senior care center has gone to great lengths to keep legacy analog MATV going in the building so those with older TV's can still use them. It's a memory care type facility and many of the residents can't operate the "new fangled" flatscreens and need their old rotary tuners from long ago, just doing our best to help those in need.

As it stands right now my issues are with a limited AGC range and what appears to be some type of "saturation" that is washing out the colors on all but the strongest saturations, set chassis in question is a T940 and thanks to member Damen I was able to get another good IF board. Now it's a matter of undoing all of my composite input mods and bring the set back to original.
Reply With Quote
  #2  
Old 04-29-2026, 06:23 PM
TinCanAlley's Avatar
TinCanAlley TinCanAlley is offline
VideoKarma Member
 
Join Date: Sep 2008
Location: So Cal, CA
Posts: 1,026
Quote:
Originally Posted by ARC Tech-109 View Post
Jailbars? Are you dealing with poor quality RF modulators or front end overload as I am? My reason for the composite input on my Magnavox was due to the IF board getting damaged while I was trying to deal with some similar issues caused by the poor quality signals coming from cheap RF modulators but the composite input introduced a number of new issues related to impedance matching and the raw input levels needed to get thru the video amps, I've since gone back to RF modulation which has brought me back to square-one and I believe the solution may be the use of CATV head end RF modulators that use SAW filters. As I understand they're far more robust and have a much cleaner output signal than the cheap-o's used in home equipment, I do have experience with these as our local senior care center has gone to great lengths to keep legacy analog MATV going in the building so those with older TV's can still use them. It's a memory care type facility and many of the residents can't operate the "new fangled" flatscreens and need their old rotary tuners from long ago, just doing our best to help those in need.

As it stands right now my issues are with a limited AGC range and what appears to be some type of "saturation" that is washing out the colors on all but the strongest saturations, set chassis in question is a T940 and thanks to member Damen I was able to get another good IF board. Now it's a matter of undoing all of my composite input mods and bring the set back to original.
I've ruled out external RF as it happens with a stand alone RF modulator, Laserdisc player's RF output and a number of other units I've tried. That's what has lead me to a possible tuner/IF issue. The replacement IF I got didn't work as a direct swap. It over saturated colors and contrast and no adjustment of color or tint made any change in color or hue. I think it's the detector voltage level. I need to set up my power supply to inject a voltage, read it on another test point and then adjust the pot in the IF for that. Since the image was there and stable, I'm sure the unit is aligned properly, just not the one voltage adjustment. That sets the voltage on the detector output going to the chroma and video board.

If the new IF doesn't fix the jailbars, I'm at a loss as I've replaced and tested every component that could cause the bars.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL

Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:50 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.