Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 04-02-2026, 03:14 PM
TinCanAlley's Avatar
TinCanAlley TinCanAlley is offline
VideoKarma Member
 
Join Date: Sep 2008
Location: So Cal, CA
Posts: 1,026
Quote:
Originally Posted by BeamT View Post
I'm assuming you have the set back up and running, and the jail bars are visible.

Try this:

1) Gently disconnect the IF Input cable from the tuner to the chassis. At the chassis it is very similar to an RCA connector. Power up, jail bars still visible? Power down.

2) Remove the IF Module. Power up, jail bars still visible? Power down. Leave the IF Module out.

3) Drive the video stages with one of your generators. Most generators will block a small amount of DC but to be safe, connect the 50 Ohm video output through a .1 uf or so capacitor to block the DC. Connect to the C1 test point you have identified. Shield to a nearby chassis ground. Power up, adjust video level from the generator, try different patterns, what do you see?

Safety-- This is a transformer based set, so you should be reasonably safe using grounded test equipment, unless something is seriously wrong.

I appreciate my Sencore PR57 everytime I use it
Set isn't together yet. I'm waiting for the C202 and 204 replacements. Am also going over everything under the chassis to make sure I didn't disturb something and create a short. Once that is done, it goes back together on Monday or Tuesday, depending on delivery of parts.

The instructions with the Hickok says to ground the generator by connecting black lead to chassis. I wish it had more details on that since I had assumed the black lead went with the red lead which is the trigger out for my scope. That and I'm sure it needs another adapter of sorts as my scope's trigger input is a 1Mohm 20pf BNC. But that's another day's battle.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL

Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:41 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.