Sanyo CPT3240 no image troubleshooting

[Username1]

.

Good Job getting help with a schematic... WOW I don't think I worked on one with a 225V
Power supply, All the ones I remember were around 120V, 150V. Anyway... With
no pic, and that resistor smoking I think maybe you got a shorted Horiz. Output
transistor, or possibly Vert. Output Shorted. So get checking on those parts.

OOpsie - I see Your in Norway.... Is your wall outlet voltage 240V? I see the
schematic also shows 240V on the plug...... Interesting.... Funny how
that regulator IC is floated above ground... I think they used that
same basic circuit in 240V area and in US 120V.

Good Luck!

.