![]() |
|
|
|
#1
|
|||
|
|||
|
Finally got some time back on this and found a shorted 4700pF ceramic disc before the diode for the 130V. Since the shorted cap was in parallel with the winding, it took awhile to find. I was getting concerned there was a problem with the power xfmr. I've put 325Vac across the 'motor' cap with a current meter in series, and the current is right where it should be. This set has got seven of the Zenith special 22-5001 white caps. I believe these are 0.015uF, but not sure what voltage. I'm assuming at least 2kV. Any thoughts?
|
|
#2
|
|||
|
|||
|
I've had good luck with Panasonic ECW series for this capacitor .0018uf @ 1.6kv.
Mouser Part # 667-ECW-HA3C182H4 Panasonic .0018uf (1800pf) 1.6kv 3% or Mouser Part 667-ECW-H16182RJV Panasonic .0018uf (1800pf) 1.6kv 5% Digikey has also carried these in the past.
__________________
Beam_T |
![]() |
| Thread Tools | |
| Display Modes | |
|
|