|
Just noticed something. When I was adjusting the ACC, it said to short two points, read voltage, remove short and adjust ACC to same voltage as when shorted. I did this and the voltage was 16.8V. I've been going over the schematics and it shows the ACC points on the Sub Carrier Regen as being 8.6V to and from the Chroma module. The voltage I measured was twice as much, but other than the schematic, I can't find anything about voltage level for the ACC and whether it goes up or down from the voltage in the schematic.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|
01-24-2026, 04:25 PM
Threaded Mode