Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #13  
Old 01-08-2026, 09:51 PM
vol.2's Avatar
vol.2 vol.2 is offline
VideoKarma Member
 
Join Date: Feb 2023
Posts: 435
Quote:
Originally Posted by luRaichu View Post
Turns out the screen (G2) voltage was set too high on the flyback. Lowering it fixes the problem.
Now, I have to correct the picture geometry. It's those yoke shims that peel off the tube
Interesting. I wouldn't think that the G2 would cause some kind of strobing red situation like that.

I have had a bad flyback pot before, and that did actually cause flakey flashing, but it wasn't set wrong, it was loose inside and the slug would pop in and out of the pot and cause wildly erratic brightness levels. I had to replace it.

The fact that you got red strobing probably means your color background (also called bias) is set wrong. If the G2 was to blame, it's bringing up all colors equally, and it shouldn't have looked red like that. It's needs to be balanced.

https://crtdatabase.com/faq/crt-color-adjustment


And if you really want to dial it in
https://consolemods.org/wiki/CRT:CRT...20choose%20D93.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:45 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.