|
|
|
|
|
#1
01-03-2026, 01:53 PM
|
||||
|
||||
|
I am trying to figure out how to remove the remote control board without removing the entire front panel worth of controls, tuner motor, etc. While I was trying to figure it out, I remembered I still need to order the replacement capacitor(s). The troubleshooting PDF I have say's it's a .01uf/100V and so does the SM, but the part numbers in the SM all lead me to 1000V capacitors. Is this an error in the SM, or did they mean for replacements to be a higher voltage?
Once I figure out how to remove the board with the least amount of effort or factory wire routing disturbance, I will be able to verify the value, but I'm assuming that board has nowhere near that much running through. Going to order up some of the 100V anyway. I need C213 and C214 in the chart.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 Last edited by TinCanAlley; 01-03-2026 at 01:54 PM. Reason: capacitor number added 
|
|
#2
01-31-2026, 12:13 AM
|
||||
|
||||
|
What Chassis?
https://videokarma.org/showthread.php?t=265964
__________________
Brian USN RET 22YRS (Avionics/Cal) CET-Consumer Repair and Avionics ('88) "Capacitor Cosmetologist since '79" When fuses go to work, they quit!
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
