|
|
|
|
|
#1
11-18-2025, 07:10 PM
|
|||
|
|||
|
I didn’t but I completely disassembled the yoke and the mounting when I fixed the stripped nut so maybe something got messed up. The back cardboard cover was ripped and destroyed so I 3-D printed another. I’ll have to look more closely at it. My recollection is the screw hole on the yoke for the rotation adjustment wasn’t removable but maybe it was and I remounted it 90 degrees out. I definitely did not change any wires on the yoke plug
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
