![]() |
|
|
|
#1
|
|||
|
|||
|
I tried it today with every cap replaced in the sections we’ve been talking about and I got a raster on the 5” CRT. That’s the first time that’s happened. HV unfortunately hasn’t changed much, still hovering around 4K. I didn’t get a chance to do any voltage checks or look at any traces. I think there may be an issue with the yoke and how I have it mounted because it’s out 90 degrees. The horizontal changes with the vertical and vice versa. Doh!
|
|
#2
|
||||
|
||||
|
Interesting. Is it just rotated 90 degrees? The horizontal and vertical are still acting on the correct axis of the picture, as in you didn't change the wiring on the yoke plug?
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|