Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Television Broadcast Gear

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #12  
Old 06-15-2025, 05:53 AM
kf4rca kf4rca is offline
VideoKarma Member
 
Join Date: Feb 2015
Location: Atlanta
Posts: 970
Another important parameter is sampling. Early TBC's were 3fsc (10.7 mhz). This was determined by the Nyquist theorem. Later ones were 4fsc (14.31818 mhz). This required faster memory and reduced aliasing. Ten bit quantizing and 4fsc would later become the SMPTE standard.
Another piece of equipment I couldn't find any info on is the DPS Phaser1. It was made by Digital Processing Systems out of Toronto. It was a 9 bit unit, occupied about 10 inches of rack space and had two 6 inch fans on the rear. DPS was later bought out by SA (Scientific Atlanta). We liked it so much we bought another one when we put our second live truck in service. It used the Signetics 8x305 processor and had ECL memory. It was a workhorse. It would make chicken salad out of chicken (well, you know).
CNN had a Quantel. I thought it was over-priced at $250K. But they were the first with a DVE. But the Ampex ADO would become more popular as it was about $78K.
__________________

Last edited by kf4rca; 06-15-2025 at 06:30 AM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:16 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.