Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 05-01-2025, 07:49 PM
Chris K Chris K is offline
VideoKarma Member
 
Join Date: Jun 2022
Posts: 1,534
Quote:
Originally Posted by Kevin Kuehn View Post
R12 is within the voltage regulation feedback loop. If it's resistance increases as it warms up, the regulator will compensate until the point of current limiting kicks in. So I think the question is, is the voltage drop across R12 still the same after running 24 hours?
No it isn't. It was 0.357V or 357mV and right now it's 328mV. The unit is still holding and reading frequencies actively however, since the cover has been on, the voltage has dropped from 5.0V to 4.96V. Probably insignificant but I haven't seen anything other than 5.0V on the nose until I just measured it after taking off the top.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:23 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.