21zp4a crt sub

[bandersen]

GC made a wafer with built-in cap you could install between the damper tube and socket. I'll post a photo when I dig mine up.

[timmy]

Originally Posted by bandersen

GC made a wafer with built-in cap you could install between the damper tube and socket. I'll post a photo when I dig mine up.

That would be interesting to see. At this point I just wanted to try and make sure all was right so lowering the hv to 10.2 kv down from 12 kv would be the only reason to widen the screen so now it’s at 12 kv with full screen and width and height and linearity are good. How much would that cap for the damper expand the width ?