Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 03-08-2025, 05:21 PM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
Quote:
Originally Posted by liammc00 View Post
I have been using the set and I noticed on blank screen I see what looks like a line that is little bit brighter than rest of the image on the right side of screen on dark sheens or when no image is present. The line changes with how bright the content is on screen. I'm manly just curious what might cause this and if it's something I need to fix or something out of adjustment.
Its probably the filter cap on the 200 V line. Its a top ten problem on
ALL sets. Symptoms are any combination of, or one of the following.

Pix goes from dark to light across the screen.
Pix just "not right",
Poor color, can look like bad CRT
Bright white raster with retrace lines.
Jail bars on left fading as you go right.
Cant turn brite down.
AND others that dont come to mind !

Bottom line is change it on any SS set you are fixin !

Zeno
LFOD !
Reply With Quote
  #2  
Old 03-08-2025, 05:36 PM
liammc00's Avatar
liammc00 liammc00 is offline
real TVs have a CRT
 
Join Date: Jun 2018
Location: Belpre, Ohio
Posts: 270
Quote:
Originally Posted by zeno View Post
Its probably the filter cap on the 200 V line. Its a top ten problem on
ALL sets. Symptoms are any combination of, or one of the following.

Pix goes from dark to light across the screen.
Pix just "not right",
Poor color, can look like bad CRT
Bright white raster with retrace lines.
Jail bars on left fading as you go right.
Cant turn brite down.
AND others that dont come to mind !

Bottom line is change it on any SS set you are fixin !

Zeno
LFOD !
Thanks I don't think I have any caps that go up to that high of voltage on hand at the moment but once I find what value the set takes I will order it. I have a RCA from 1991 and it has very washed out picture I thought screen control was to high but before I mess with screen I will check the 200v filter as to my knowledge no one has ever touched the screen control.
Reply With Quote
  #3  
Old 03-08-2025, 08:41 PM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
Quote:
Originally Posted by liammc00 View Post
Thanks I don't think I have any caps that go up to that high of voltage on hand at the moment but once I find what value the set takes I will order it. I have a RCA from 1991 and it has very washed out picture I thought screen control was to high but before I mess with screen I will check the 200v filter as to my knowledge no one has ever touched the screen control.
The RCA cap may be part of a big 2 section filter can. Just cut off the wire & make a flying splice with a new one.
The cap is almost always either a 4.7 mfd or 10 mfd. Use a 350 or 450 volt.
temp 100 degree C.

Zeno
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:39 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.