Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Television Broadcast Gear

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 12-31-2024, 04:27 PM
Dave A's Avatar
Dave A Dave A is offline
VideoKarma Member
 
Join Date: Aug 2003
Location: SE Pennsylvania
Posts: 1,571
Solved...for now! Both of you gave me the clues to look for. The M3A is a different animal. It is an improved version of the M3, mostly with a better back-end connector assembly and controls. I suspect the innards are mostly the same. The CCU seems to be good for both M3 versions, Doug, the CCU manual was silent on the RGB connections but is saved here. Thanks. And ARC's mention of switches is absent on my cam or CCU. So, I went to the M3AP camera manual and there it was with no mention of switch positions. I found the 14-pin connector pinout page and found two tables. One cable type is for a VTR connection and another for a CCU connection, not mentioned in the CCU manual. The short VTR cable I have uses the RGB pins for data and alarm connections from the VTR. RGB is only available on the long form CCU only cable. 10m or more. My error with the wrong cabIe. I don't think I have done any damage but now the hunt for the CCU cable begins. And if anyone has one around...
__________________
“Once you eliminate the impossible...whatever remains, no matter how improbable, must be the truth." Sherlock Holmes.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:14 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.