Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Things with Motors

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #38  
Old 12-21-2024, 10:34 PM
Username1's Avatar
Username1 Username1 is offline
Not sure how I got here.
 
Join Date: Dec 2009
Location: Orange County NY
Posts: 3,668
.

I don't remember you saying the car had O2 sensor or not. If not, then there is no way
the car can run in closed loop - so it depends on stored look-up tables for engine
parameters - This can result in a possible miss. Also don't forget ethanol fuel most
likely did not exist back in '83. There are so many little things that can cause
a miss in those older cars.

Any sticking valve (electric, temperature, or vacuum) can cause a miss, or stalling.
My parents had a 1979 Ford LTD back in the day and it would stall getting off the
freeway, turns out a sticking EGR valve was the trouble. Otherwise it ran great
for years.

Your best bet is to get the original 3" thick manual written by ford, and get to
know the system inside-out.

Also - the thin hard plastic vacuum lines were to get a faster response from the
item at the end of the line. Hard walls, thinner line, all for less volume in the
line to change when vacuum was applied. I have them on my 88 Dakota,
I think it helps the HVAC stuff respond fast.

.

.
__________________
Yes you can call me "Squirrel boy"
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:59 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.