Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Transistor Radio

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 12-08-2024, 03:23 PM
CarlQB CarlQB is offline
VideoKarma Member
 
Join Date: Dec 2024
Posts: 3
OK thanks. I figured it must be there mostly for noise reduction. It was suggested to me (on another forum where I asked) that such a resistor was rather unusual, and while its presence might have something to do with noise reduction, with an unpolarized plug its got more chances creating a dangerous situation of having line voltage on the chassis, and I probably should remove this resistor and make the 6V power supply completely independent from the mains.
Since I'll be working on this radio I think I'll just take the resistor off the board for now, see if it affects the radio in any way, I can always solder it back if needed.
Thanks!
Reply With Quote
  #2  
Old 12-09-2024, 07:47 AM
Alex KL-1 Alex KL-1 is offline
VideoKarma Member
 
Join Date: Jan 2021
Location: Brazil (Paranį)
Posts: 515
Quote:
Originally Posted by CarlQB View Post
OK thanks. I figured it must be there mostly for noise reduction. It was suggested to me (on another forum where I asked) that such a resistor was rather unusual, and while its presence might have something to do with noise reduction, with an unpolarized plug its got more chances creating a dangerous situation of having line voltage on the chassis, and I probably should remove this resistor and make the 6V power supply completely independent from the mains.
Since I'll be working on this radio I think I'll just take the resistor off the board for now, see if it affects the radio in any way, I can always solder it back if needed.
Thanks!
In part, yes, if the resistor voltage rating is less than the maximum voltage breakdown of the PS trafo. If is a common resistor, for sure will survive less spikes than the trafo. But, if is a HV resistor, will survive far more than the trafo, and trafo shortens first (to the secondary).
+1 for the static charge draining cited by jr-tech.
__________________
So many projects, so little time...
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:49 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.