Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 11-28-2024, 10:08 AM
init4fun's Avatar
init4fun init4fun is offline
VideoKarma Member
 
Join Date: Mar 2011
Posts: 1,210
Quote:
Originally Posted by vortalexfan View Post
I had seen part of the link that he had posted and I thought he was posting the link to the digital copy of the Riders version of the service data for this radio chassis which I already have a physical copy of which didn't provide any useful information as far as giving any voltage or resistance readings or any blowup diagrams of each individual speaker wire connection, that's why I responded the way I did, I wasn't trying to be mean or rude to him, I just thought that he was giving a link to something I already had a physical copy of which had proven to be useless already to me.

I apologize if my comment came off as being ungrateful or mean in anyway, it certainly wasn't my intention.

By the way, what is the source of that service data? It's definitely not Riders or Beitman's (which is basically the same info as in Rider's) because the service data in Rider's was not this detailed.
Not to worry, I wasn't bustin your balls, , , , much....

I believe that info came from Stewart Warner themselves, via "Nostalgia Air".

As long as you get the field coil connected to the B+ supply, and the voice coil to the output transformer's secondary, you won't fry anything. You now know from the schematic the field coil should be right around 460 ohms, I'd be surprised if the voice coil (with humbucking coil in series) would by much over about 16 to maybe 20 ohms, maybe even less. As long as you get similar readings the speaker is likely not fried. If, after hooking it up and installing new B+ filter caps* you have excessive hum, try reversing the voice coil's two leads going to the output transformer (swap the two wire's positions, one for each other) and see if the hum is reduced.

PS, both the field coil and voice coil should only have continuity across their two wires, and not have any continuity from their wires to the speaker's metal frame

* Both caps listed as part #39, which are 8 MFD at 435 volts rating. Use 10 MFD 450 volt modern electrolytics in their place. DO NOT drastically increase the MFD rating of them, if it played fine when new with 8 MFD, it surely will play just as fine now with 10 MFD. Drastically increasing the MFD rating will in no way be "better", and will in fact stress the rectifier and field coil (which is also the B+ filter choke) more than needed.

Last edited by init4fun; 11-28-2024 at 10:40 AM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:57 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.