Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 11-22-2024, 05:51 PM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
Just thinkin.........
There are empty holes on the PCB. IIRC there were 2 different
parts, one a photo-isolator the other a relay. They had different pin outs so some unused holes.
The replacements were the grey 1 inch long, flatish isolator.
I THINK the resistor was OEM, not added.
On the PCB if the transistors are plugged in you may have knocked one
part out & killed the ON /OFF so check that.

So back to the olden days....... All of these chassii were in 25" sets.
I was the jig man so being on the road was rare to me. When there was trouble in this area the road man would order a rebuilt selector assy instead of messing
with multi trips on an often int problem.

Zeno
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:30 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.