Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 11-18-2024, 07:01 PM
Zenith26kc20's Avatar
Zenith26kc20 Zenith26kc20 is offline
VideoKarma Member
 
Join Date: Apr 2009
Location: New Orleans
Posts: 860
Triac was usually jumped when cable came. The cable boxes had a switched outlet and made the on/off on the TV redundant.
Check the circuit breaker and ferroresonant capacitor. The cap opens and trips/kills the circuit breaker.
Also, check/replace any white safety capacitors. They would pop and slowly raise the high voltage until it could pop the neck on the CRT.
Check the capacitor/resistor connected to the horiz out transistor. 1.5 or 15 ohm (sorry, can't remember the actual values) and a small electrolytic paralled together. The resistor goes up in value killing the horizontal output and tripping the breaker.
Other than these, a very reliable set with a great picture.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:54 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.