Sony Trinitron KV-1331

[liammc00]

I checked the H. Out with my multimeter on diod mode and this my result I got back.
With positive lead on Collector I got 2.0 on both emitor and base. If I reverse the leads I get .500 on emitor and base. If I measure emitor to base I get a dead short no matter which way I have the leads. (Was measured in circuit)

i also just took H. output out of the board and put it in one of those cheap compnet testers from china and i have included a picture of the results

Schematic can be found here
https://drive.google.com/file/d/1VPj...w?usp=drivesdk