Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 10-28-2024, 10:42 AM
kf4rca kf4rca is offline
VideoKarma Member
 
Join Date: Feb 2015
Location: Atlanta
Posts: 970
Whoa! It has a 7 pin connector for the cable. OK, two pins will be used for the filament and should go to the power transformer.( Plug it in and you should get 6VAC.
Three pins go to the RGB selector switch. That leaves 2 pins left. Most likely Kathode and G1. So you have a 50/50 chance of connecting it right.
Do you have a 7 pin test CRT? I remember the early computer monitors (CGA) having a 7 pin base. You will need a socket to make a cable.
Its probably an OEM tester- used in the manufacturing environment and was only designed to test 1 type of CRT. Good luck.
It might be something like a B&K 400 tester which was very popular at the time.
__________________

Last edited by kf4rca; 10-28-2024 at 11:34 AM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:31 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.