Building my own CRT chassis, need advice

[Devicemodder]

Originally Posted by luRaichu

This is a really neat project! I have a 5" Sony Watchman that I would love to convert into a raster/vector monitor. The only other thing I've seen like it is Eric Schlaepfer's CRT driver board (tubetime.us) but that's for electrostatic deflection tubes.

No comment on your sense of humor though... hah

Yeah, I add this silkscreen to all my boards. Had a spare tube, and didn't want to have it sit around unused... so I thought I'd try and roll my own chassis.

[luRaichu]

Originally Posted by Devicemodder

Yeah, I add this silkscreen to all my boards. Had a spare tube, and didn't want to have it sit around unused... so I thought I'd try and roll my own chassis.

How much does it cost to build this chassis?

[Alex KL-1]

+1 for own personal projects, cool
Seems to have even a linearity coil

BTW; maybe a interference in the H (making the lines jittery), or V circuit, like you first suspected, also, is good to check

[Devicemodder]

Originally Posted by Alex KL-1

+1 for own personal projects, cool
Seems to have even a linearity coil

BTW; maybe a interference in the H (making the lines jittery), or V circuit, like you first suspected, also, is good to check

Could be that. I'll check next time I'm at my bench. Supposed to have a blank raster, like if you removed the tuner from a TV set.

[Devicemodder]

Originally Posted by luRaichu

How much does it cost to build this chassis?

Not sure the total cost as most of my parts are salvaged from other busted electronics. The board though cost around $20 from JLCPCB, for 5 blank boards.