Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 09-17-2024, 05:06 PM
Penthode's Avatar
Penthode Penthode is offline
VideoKarma Member
 
Join Date: Jun 2009
Location: Kitchener/Waterloo Ontario Canada
Posts: 1,463
with regards to the core positioning for maximum. You said the core was unscrewed to get the peak. Unscrewing the core reduces inductance which means you are tuning it higher in frequency. What I think you have done is tune it to the same frequency as another stage and it has introduced oscillation! I mentioned the danger earlier of it breaking into oscillation. I suggest you must fix this before adjusting the traps!

Put the core back close to the original position. The circuit tunes broadly and you should detect a smaller peak near the original position. Also if you do get into a state of oscillation and cannot get out of it, what you do is increase the AGC voltage until the oscillation ceases and try increasing the 8601a input until you see the signal.

Certainly if you are having to adjust any opf the circuits that far away, you are doing something wrong. Becareful and stop and think and ask before making assumptions.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:32 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.