Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 09-16-2024, 05:45 AM
fumplet fumplet is offline
VideoKarma Member
 
Join Date: Apr 2023
Posts: 161
is there supposed to be a cover on top of the high voltage cage? Mine doesnt have a top to it.
Also I noticed that when I measured the filament voltage on the philco picture tube in it, my sencore cr 70 has the red mark for the proper filament voltage of Im guessing 6.3 volts (a/c normally in the set , Not d.c. voltage) I measure 6.14 volts the sencore is supplying so I cranked up the measured with dmm voltage to acutall 6.3 volts although d.c. volts. Is my tester a little low on volts or is it because the measurement is correct because a/c volts is slightly lower for a d.c. equivalent voltage?

Last edited by fumplet; 09-16-2024 at 05:51 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:56 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.