Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 09-04-2024, 11:27 AM
Chris K Chris K is offline
VideoKarma Member
 
Join Date: Jun 2022
Posts: 1,534
Dear god...so embarrassing. I thought we had talked previously talked about using a 1nF cap in this manner. My bad. Yes the probe is grounded through the scope clip to the chassis and the probe is connected to the test point. I'll get rid of the capacitor. I don't know what I'm doing wrong. 10 pages of instruction, mentoring, buying equipment, suggestions, fixes, double checks and triple checks and still crap on the scope. Maybe I'll change the 6AL5 and see if that does anything. The instruction says connect the scope probe to the junction of C183 and R203. Isn't that pin 5 on the 6AL5 or do I have this wrong too?
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:43 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.