Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 08-20-2024, 09:05 PM
Penthode's Avatar
Penthode Penthode is offline
VideoKarma Member
 
Join Date: Jun 2009
Location: Kitchener/Waterloo Ontario Canada
Posts: 1,463
Quote:
Originally Posted by Chris K View Post
I'll make the detector. Thank you for the design! There may be issues with the 8601. I don't think I'm getting RF output. Output level doesn't change. I'll need to break into it and see what's going on!
Without the HP8600a, the HP8601a should act as a standard signal generator. If you have a 100MHz scope, simply connect the probe to the RF output and set it to say 10MHz. Switch it to CW mode and you can ignore the sweep mode switches for a moment. Just crank up the output and set the TIME/DIV on the scope to 0.1uS per division and see if you can see a high frequency sinusoid on the scope.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:15 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.